Ski Catalog

TS10B is harder than the other T10’ products of the PRO system. The extra hardness makes the wax more robust and so absorbs less dirt. The black additive reduces friction in polluted snow. This is particularly noticeable when the wax is used alone. The wax has very good test results on artificial snow and snow transformed into old natural snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS10B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 165°C. - Liquid yet durable - Excellent as a topping base - Ensures a smooth glide in warm conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

TSP10 is a great powder in wet conditions, typically when new or transformed snow are turning wet. Despite being a quite soft powder, the durability is great, and the powder can easily hold up for longer distances. The speed of the iron should be approx. 8-10 sec. on a skating ski. Important to have a good iron to get an efficient melting of the powder. TSP10 can be used as a race powder alone, but is often used as base for top coats. Recommended iron temp.: 160°C (320°F). - Powder for competition - Durable - For warm conditions - Pro by Swix ski wax - Fluoro free - Swix powder

TSP8 has a softness and racing formula that makes it perfect in conditions on both sides of the freezing point. The speed of the iron should be approx. 8-10 sec. on a skating ski. It's important to have a good iron to get an efficient melting of the powder. TSP8 can be used as a race powder alone, but is often used as a base for top coats. Recommended iron temp.: 160°C (320°F). - A favorite in nordic disiplines - Perfect underlayer for top coats - Replaces HF8X - Fluoro Free

Replacement fine diamond disc for EVO edge grinder. - Grindstone - For EVO edge grinder - For enthusiasts and professional waxers - Gives fantastic results

ROUGH diamond disc for EVO. For setting side-edge angles on new skis or to change angles. Also good for removing burrs when the edge is damaged. - Grindstone - For EVO edge grinder - For enthusiasts and professional waxers - Gives fantastic results

The KORE Backpack is a feature-laden, multi-use pack with an avy gear compartment, ski carrying capabilities and padded shoulder straps. The KORE Backpack is a feature-laden, multi-use pack for freeride enthusiasts. With 30 liters of volume, the KORE Backpack has a dedicated avalanche gear compartment smartly accessed by a top zipper. Another compartment accommodates a hydration system, while a top accessory pocket keeps valuables safe. A helmet can be stowed on the outside of the pack in its own carry bag, while skis can fit diagonally or in an A Frame. Padded shoulder straps and a waist strap add comfort while hiking. - VOLUME: 30 L - DIMENSIONS: 30 * 55 * 16 CM - WEIGHT: 1080 gm - MATERIAL COMPOSITION (OUTSIDE): 100% Polyester - MATERIAL COMPOSITION (INSIDE): 100% Polyester Features: - Diagonal or a frame ski carry - Dedicated avalanche tool compartment - Innovative helmet carry - Main compartment top and back access - Hydration reservoir compatible

The easy flexing boot for junior racers and all-mountain skiers, the RSJ 65 offers the perfect blend of comfort and performance for skiers ages 12 and under. The junior mono-injection shell, Control Fit liner, and four-buckle design address the junior fit for smaller calves and foot shapes to deliver enhanced junior specific comfort, warmth, and performance.

Designed for the beginner skier who prioritizes comfort, warmth, and convenience in their ski boot, the Mach Sport HV 70 is specially built for skiers with high-volume feet. Designed with a 103mm last, the Comfort Celliant liner increases circulation for optimized warmth and performance. If needed, you can add personal customization with Tecnica's C.A.S. system to solve any additional fit problems. Double Quick-Instep and Lift-Lock buckles make for easy entry and exit, and the 70 flex is our most forgiving for all-day on (and off) mountain comfort.

Lightweight and durable women ski and snowboard helmet in rosé with slim profile and protected ear pads The patented Sphere Fit system adapts automatically. The COMPACT helmet line is focusing on the essentials of a winter sports helmet: great look, perfect fit, and – most importantly – supreme protection. The COMPACT W is a super light helmet with a slim profile in a timeless design, supported by a durable ear pad frame. This helmet fits automatically to any head shape thanks to our patented Sphere Fit Auto system, which can also be size-adjusted if needed. A comfortable helmet climate is guaranteed by the vent channel system with seven ventilation outlets. - CONSTRUCTION: Hardshell Technology - SIZES: XS/S (52-55 cm), M/L (56-59 cm) Technologies: HARDSHELL TECHNOLOGY This helmet technology is outstanding in longevity and impact protection. For this reason we use it in our race and rental helmets. 360° MICROSHELL The 360° Microshell is a polycarbonate layer, which three-dimensionally wraps around the lower helmet lip, that prevents scratches and dents in the helmet’s foam. THERMAL VENTILATION Thermal Ventilation is our automatic ventilation system which leads warm air away from the head to the outside without allowing any cold air to the inside. MICROFUR Microfur is both warming and comfortable on the skin. As a helmet lining it creates the perfect fit and feel for all-day shredding. BEANIE LINER The soft Microfleece material of the Beanie Liner adapts perfectly to the head and thus avoids any bruises and the unpleasant entering of cold air. Molded-in mesh zones let heat and moisture escape to the outside and, together with the ventilation system, ensure a pleasant head climate. SPHERE FIT AUTO The new and patented Sphere Fit system wraps around the head like a beanie, creating a snug and comfortable fit without applying any pressure. Using an elastic band, the fit is adapted automatically but can be adjusted by using the click system in the back of the helmet. NECKGATOR The Neckgator provides comfort and warmth to the helmet wearer. It adds comfort, fit and excludes the elements. EN 1077:2007 CLASS B EN 1077 is the European standard for ski & snowboard helmets, taking into account the results of collision tests to ascertain dampening and puncture resistant qualities of the outer shell. Class B of this certificate certifies helmets with soft ear protectors.

The remarkably light CLARK is our freestyle/freeride model built around ultra-lightweight IN-MOLD technology. At only 327g*, you‘ll barely notice you have it on — making it perfect for big mountain adventures. Yet don‘t let its lack of heft fool you, IN-MOLD construction with 360° EDGE PROTECTION delivers optimal protection. The AIR JAM CLIMATE CONTROL and Xdry PERFORMANCE LINING let you respond to the temperature and keep a cool head during exertion. One hand is all you need to close the magnetic clasp on the chinstrap or to adjust the CLARK to your head size with the RTS WHEEL. Its striking design is unlike any other, making the CLARK look as good as it performs. *Beanie-ready setup (without lining and ear-pads), size M, weight +/-5% - Size: Small: 51-55 | Medium: 55-59 | Large: 59-63 (cm) - Certification: CE-EN-1077-2007-Class-B - Weight: Small: 365g | Medium: 395g | Large: 425g IN-MOLD CONSTRUCTION - Extra light and world-class quality: MARKER IN-MOLD helmets feature an extremely stable construction, formed under heat by compression molding an impact-resistant, rigid EPS core into a durable polycarbonate shell. This ensures an inseparable bond between the shell and the high impact dampening material. Additional polycarbonate outer layers in the lower parts of the helmet offer greater stability and protection. Because they are so light, IN-MOLD helmets are comfortable like no others. MARKAIR CHANNEL SYSTEM - Clear vision and a cool head. The complex MarkAIR CHANNEL SYSTEM, used in all MARKER helmets, is the most advanced temperature regulation system available. It consists of a precisely calculated network of vent openings and air channels to combine the ventilation of the outer shell with interior channels of the EPS foam core. This allows the MarkAIR CHANNEL SYSTEM to literally "draw" the warm, moist air out of the goggles, "sucking" it along the air channels and out of the helmet to reduce significantly any fogging of the goggles. At the same time, there is a constant and pleasant flow of air to cool the entire system and regulate it automatically. This ensures a cool head whatever the situation, without need for manual adjustments. AIR JAM CLIMATE CONTROL - The AIR JAM CLIMATE CONTROL allows for regulation of the airflow using a waterproof, folding interior lining. When the openings are closed, they provide a warm and dry air cushion that is especially helpful in keeping the head from getting chilled on cold days. On warm days the vents can be unblocked to generate maximum airflow within MarkAIR CHANNEL SYSTEM. RTS FIT SYSTEM - Rotate to size – there's no simpler way. The three-point construction on the rear of the head adapts to your personal head shape in seconds thanks to the adjustment dial. This translates not just into top wearing comfort, but also into a perfect yet pleasant fit. During a crash you want a helmet that sits just right and won't slide around, giving your head true protection. XDRY PERFORMANCE LINING - Technical performance lining that ensures optimal thermal efficiency. The textured material insulates against cold and, in the event of excess heat, the air is transported to the exterior. Beyond this, moisture is wicked outwards to prevent excessive sweating. Features: quickly removable and hand-washable in lukewarm water. FIDLOCK OG SNAP - The revolution for helmet closures – extremely convenient to operate. The FIDLOCK OG SNAP is the first magnetic safety closure with a slider mechanism that can be opened and closed with one hand. This helps ensure an extremely secure hold in the event of a crash, yet can be operated very quickly even while wearing a ski glove and is designed to guard against pinching your skin. REMOVABLE EAR PADS – AUDIO READY – NATURAL AUDIO REGULATION - These removable earpads were designed with ergonomics in mind, and deliver a comfortable fit and excellent thermal insulation. If at any point you want to be able to hear your surroundings unfiltered, then the NATURAL AUDIO REGULATION system lets you remove the inserts without further ado. All ear pads (excluding KOJO) are of course also AUDIO READY — compatible with all current music players and smartphones. Both earpads remove quickly and easily and can be washed in luke-warm water. BEANIE READY - Like skiing with a beanie under your helmet – or sometimes with, sometimes without? BEANIE READY means that you can remove the lining from your helmet quickly and easily, and replace the lining with your beanie. The helmet has no annoying Velcro enclosures that could damage your hat! PSE GOGGLE CLIP - Absolutely stylistic and functional goggle clip to secure the goggle band. Easy and simple to replace or remove. When the clip is removed, the PSE DISC protects the thread and keeps it free from ice and snow.

The Free 7 is Marker's all-purpose Junior freeskiing binding, featuring a 95mm brake for all-mountain oriented junior twin-tips and mid-fat junior skis. Its toe and heel designs allow compatibility with both adult and junior boot lug designs. AFD GLIDING PLATE - MARKER bindings are equipped with a movable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings, or on ski tours. GRIPWALK THE SOLE-BINDING SYSTEM FOR BETTER WALKING COMFORT AND TOP SKIING PERFORMANCE - GripWalk contains a new co-polymer sole with a rocker profile. The convex shape and ribbed tread of the rubber add a lot of walking comfort and provide a much better grip. Still, integrated pads made of stiff and rigid materials, enable great power transmission and a more precise release function of the binding. GripWalk soles are the perfect tuning parts designed for selected premium ski boots and bindings. COMPACT HEEL - A statement of efficiency - with the usual optimized MARKER release properties and the perfect mix of great design, lightness, and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to improved release properties and is an excellent value. BIOTECH - During a backward twisting fall, both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognizes this unfavorable force combination and reliably reduces the release force.

Marker's Companion helmet brings utility and great looks into focus with its double in-mold design, innovative Fidlock buckle system, and adjustable venting. This lightweight, comfort-oriented helmet suits a huge variety of skiers and will be your friend for years on the hill. - Size: Small: 51-55 | Medium: 55-59 | Large: 59-63 (cm) - Certification: CE-EN-1077-2007-Class-B - Weight: Small: 420g | Medium: 440g | Large: 470g IN-MOLD CONSTRUCTION - Extra light and world-class quality: MARKER IN-MOLD helmets feature an extremely stable construction, formed under heat by compression molding an impact-resistant, rigid EPS core into a durable polycarbonate shell. This ensures an inseparable bond between the shell and the high impact dampening material. Additional polycarbonate outer layers in the lower parts of the helmet offer greater stability and protection. Because they are so light, IN-MOLD helmets are comfortable like no others. MARKAIR CHANNEL SYSTEM - Clear vision and a cool head. The complex MarkAIR CHANNEL SYSTEM, used in all MARKER helmets, is the most advanced temperature regulation system available. It consists of a precisely calculated network of vent openings and air channels to combine the ventilation of the outer shell with interior channels of the EPS foam core. This allows the MarkAIR CHANNEL SYSTEM to literally "draw" the warm, moist air out of the goggles, "sucking" it along the air channels and out of the helmet to reduce significantly any fogging of the goggles. At the same time, there is a constant and pleasant flow of air to cool the entire system and regulate it automatically. This ensures a cool head whatever the situation, without need for manual adjustments. 2 POSITION CLIMATE CONTROL - The ventilation within the helmet can be controlled using the adjustable 2 POSITION CLIMATE CONTROL (partially or fully closed). This works even with gloves on and while in motion! Move the slider to control the air volumes to match your own personal warmth preferences. Naturally, the MarkAir CHANNEL SYSTEM will assist keeping your head warm and dry even if the controls are fully shut. When fully opened, the special vent design prevents the head from growing chilled. EDGE PROTECTION - All MARKER IN-MOLD and HYBRID SHELL helmets have an additional polycarbonate plate on their lower edge for extra protection in the event of a side impact. This also protects the helmet against dings and dents during transport or daily usage. The various models come with 180°, 270° or 360° EDGE PROTECTION. RTS FIT SYSTEM - Rotate to size – there's no simpler way. The three-point construction on the rear of the head adapts to your personal head shape in seconds thanks to the adjustment dial. This translates not just into top wearing comfort, but also into a perfect yet pleasant fit. During a crash you want a helmet that sits just right and won't slide around, giving your head true protection. XDRY PERFORMANCE LINING - Technical performance lining that ensures optimal thermal efficiency. The textured material insulates against cold and, in the event of excess heat, the air is transported to the exterior. Beyond this, moisture is wicked outwards to prevent excessive sweating. Features: quickly removable and hand-washable in lukewarm water. FLEECE LINER - An extra-warm, fluffy fleece that is solely used in the "Fleece Liner" Helmets. It increases wearing comfort and prevents the head from growing chilled. Removes quickly and hand-washable in lukewarm water. FIDLOCK OG SNAP - The revolution for helmet closures – extremely convenient to operate. The FIDLOCK OG SNAP is the first magnetic safety closure with a slider mechanism that can be opened and closed with one hand. This helps ensure an extremely secure hold in the event of a crash, yet can be operated very quickly even while wearing a ski glove and is designed to guard against pinching your skin. REMOVABLE EAR PADS – AUDIO READY – NATURAL AUDIO REGULATION - These removable earpads were designed with ergonomics in mind, and deliver a comfortable fit and excellent thermal insulation. If at any point you want to be able to hear your surroundings unfiltered, then the NATURAL AUDIO REGULATION system lets you remove the inserts without further ado. All ear pads (excluding KOJO) are of course also AUDIO READY — compatible with all current music players and smartphones. Both earpads remove quickly and easily and can be washed in lukewarm water. HELMET BAG

Our legendary Heli Ski glove adapted for Juniors. Strong polyamide weave on the back and Army Leather on the palm. Removable liner. Outer Material: HESTRA Triton polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Outer Material: Army Goat Leather - Durable and proofed goat leather. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester - Removable 3-finger lining Details - Carabiner - Handcuffs - Snow lock - Pull strap with Velcro closure - Eagle grip

The Perspective + goggle from Marker features a stylish, large frame design that offers a huge field of vision. Top-notch engineering abounds, with supersized spherical DUAL BIONOMIC lenses with NMT coating, for a huge field of vision. Its SUPERFIT frame with V-SPLIT NOSE adapts automatically to your face shape, so the goggles fit comfortably and securely every time. Marker's Clarity Mirror low light lens is included as a spare. PLUS SERIES NEOPRENE BOX - All PLUS goggles come in a lightweight neoprene box with a zipper to make transport and storage easier. The soft lining protects the goggles, while the vent holes allow for quick moisture evaporation. SECOND LENS - Including one Clarity mirror lens for low-light conditions. NMT OPTICS (3RD EYELID) - MARKER has developed the revolutionary NMT OPTICS coating for all lenses (except 4:3). It works similarly to the extra membrane that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease, or dust from sticking, and moisture wicks away immediately. Fingerprints, dust, and sweat have no surface to cling to and thus are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. DUAL BIONOMIC SPHERICAL LENSE - MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented toward the curvature of the human eye to ensure that objects seen through the goggles look the way they really are. Unlike traditional, non-progressively tapered standard lenses, our lenses feature Bionomic Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn't strain the eye. Exterior lens (1) - Depending on the goggles model, various materials are used to produce the exterior lens: all standard lenses are produced from robust polycarbonate and enhanced with an extremely scratch-resistant coating. They offer 100% UV A/B/C protection up to UV 400 nm. The polarized lenses on the high-end models are produced from TAC (Tri-Acetate Cellulose). This makes them ever lighter, clearer, and more scratch-resistant. TAC lenses offer world-class visibility as well as 100% UV A/B/C protection up to UV 400 nm. Inner lens (2) - The inner lens is made of acetyl cellulose and is compression molded against the spherical outer lens as part of a heating process. This ensures that the shapes are congruent for 100% undistorted vision. The anti-fog and anti-reflex coatings are ‘embedded' in the lens to prevent them from rubbing off over the long term. Thermal blocker (3) - The interior lens also functions as a thermal blocker, creating an air barrier between the external and interior lenses. This thermal blocker compensates for differences in the temperatures, with the interior of the goggles constantly warm and dry – and fog-free. MARKAIR VENT SYSTEM - All goggle frames are outfitted with the progressive MarkAIR VENT SYSTEM. Design and airflow are engineered simultaneously so that there is perfect lens ventilation and the unobstructed flow of air is enabled along the helmet and its MarkAIR CHANNEL SYSTEM. This keeps the inside of the lenses dry and fog-free. The breathable foam behind the inlets and outlets reliably resist the penetration of snow and moisture. MARKER HELMET/GOGGLE INTEGRATION - Helmet and goggles must fuse together perfectly to work as one optimally functioning unit. To achieve this, MARKER products are 100% harmonized with one another. All helmets and goggles are designed to precisely tune into the shape of the other item and harmonize with its lines. This perfect adaptation is a requirement for optimal aerodynamic performance by helmet and goggles. The MarkAIR Channel ventilation system on the helmet, combined with the MarkAIR VENT SYSTEM on the goggles, ensures top performance and airflow. The ingenious system for air intake and outlet vents, combined with a network of channels in the helmet, reduces significantly goggle fogging and allows the wearer to customize the air circulation. The result: the temperature within the helmet is appropriate for both the exterior temperature and skier exertion levels. SILICONE ANTI-SLIP COATED GOGGLE STRAPS - The high-quality, top-durability goggle straps distribute the pressure around the head for the perfect hold without irritating pressure points. Thanks to the heat applied silicone coating on the interior of the goggle straps, they sit rock-solid on any helmet for slip-free performance. XDRY TRIPLE LAYER FACE FOAM - Extremely comfortable and extra soft! The three-layer Xdry construction helps produce an optimal fit and outstanding performance. The soft external fleece layer that touches the skin absorbs moistures and transports it away from the skin.

Our legendary Heli Ski mitten adapted for Juniors. Strong polyamide weave on the back and Army Leather on the palm. Removable liner. Outer Material: HESTRA Triton polyamide fabric, Army Goat Leather - Windproof, water-resistant and breathable. - 100% polyamide. - Durable and proofed goat leather. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester Details - Carabiner - Handcuffs - Snow lock - Pull strap with Velcro closure

The Women's Thermal Edge Jersey has a superior 4-way stretch that provides airflow, retains heat and wicks moisture. A DWR treatment adds an extra layer of protection, and a full-length zipper lets you adapt to rising temps. Technical Details: - Fit Tech: Standard - Fabric: Drytex Thermal Climate: Stretch diamond terry jacquard with DWR treatment for extra climate protection - Fabric Technology: Water and wind resistant, Hard face, brushed back, heat retention, moisture management - Hem Finish: Elastic at hem - Pockets: 3 rear pockets - Visibility Features: Back reflective accents - Zipper: Full-length zip

With an emphasis on comfort, the Sportmachine 65 W focuses on your feet—so you can focus on your skiing. Its wider last and softer shell offer a plush and forgiving ride designed specifically for beginner and intermediate skiers. The Sportmachine 65 W’s reinforced sole and spine boost confidence and control by making it easier to initiate turns and transition between them. Incredibly soft, its liner is built around a woman’s calf and can be heat-molded for a custom fit. And, thanks to a dual-entry instep, getting in and out of the boot is especially easy. Great days begin with the Sportmachine 65 W. - Tri Force shell construction - Adjustable cuff profile - Dual easy entry instep

First impressions count. Guided by this belief, the Sportmachine 80 places an emphasis on comfort to help entry-level skiers fall in love with the sport. With a wider last and softer shell, it offers a plush, forgiving ride. Its reinforced sole and spine boost confidence and control by making it easier to initiate turns and transition between them. For incredible comfort, its liner is especially soft and can be heat-molded for a personalized fit. And a dual-entry instep makes it remarkably easy to get in and out of the boot. For a great time on the mountain, turn to the Sportmachine 80. - Tri Force shell construction - Adjustable cuff profile - Dual easy entry instep

Top skiing performance with optimal power transfer for the up-and-coming race generation. Welcome to the world of youth racing. The Race 10 TCX uses the same heel technology as in the Race X-cell bindings, combined with the tried-and-tested TLT toe pieces and all perfectly adjusted to the weight and skiing performance of young on-piste racers. This binding enables top skiing performance with great power transfer. - Category: Race Junior - Brake width: 85mm - Din/ISO Range: 3.0 - 10.0 - Boot type: Adult, standard Alpine - Recom. Skier's Weight: 30 - 105kg - Stand height w/o ski: 15mm - Toe System: 2 linkage - Step-in Heel: TCX - Heel adjustment range: 20mm - Weight: 1080g - AFD Gliding Plate: Stainless steel

When we developed the CONFIDANT MIPS, we paid special attention to the feedback our testers gave us so that we could optimize comfort and fit. And the high-quality MIPS protective function reduces the forces acting on the head in the event of a fall with rotational impact. With its strong design and detailed solutions, the INMOLD construction sets standards in this price segment. An optimized fit ensures that the CONFIDANT encloses the head fully, producing a comfortable, secure feeling without pressure points. The MarkAIR CHANNEL ventilation system and removable Xdry Performance padding creates a pleasant atmosphere around the head and great temperature regulation. The popular RTS 360° FIT SYSTEM allows wearers to adjust to their size. Removable SoGnar ear pads cover the entire ear and keep it warm without affecting the natural acoustics. Their capacity makes them pressure-free and more comfortable than other helmets on the market, even if you wear in-ear headphones. Sizing: - 51-55cm (Small) - 55-59cm (Medium) - 59-63cm (Large)

2023/2024 Used Junior Lease Pre-Sale Purchase your new adult lease package now and save $20.00 on your lease fee! Limited numbers of discounted lease packages are available, while supplies last. Packages include Skis, Boots, and Bindings. Available Skis: Nordica and Volkl Available Boots: Nordica and Dalbello Leasing Process Step 1: Purchase your lease through our website. Please make sure to select whether you would like the Damage/Theft waiver ($20) or if you would like to waive the coverage. Damage/Theft coverage covers all damage and theft during the whole leasing period. Step 2: On August 25th you will receive an e-mail to sign up for your fitting appointment. You must be fit before October 31, 2023. Step 3: Come to your fitting appointment and pick up your equipment for the 23/24 lease season. Step 4: Return your leases by April 30, 2024.

Are you searching for a lightweight ski and snowboard helmet that addresses rotational energy absorption while also providing an unrivaled fit and style? Then look no further than the SHRED. Totality. Thanks to its ROTATIONAL ENERGY SYSTEM™ (RES)—which is the lightest and thinnest solution for addressing rotational forces—and a ventilation system that maximizes vision and comfort by using 12 vents to pull warm air from your goggles and helmet, the Totality provides the performance, safety, confidence, and style you need to feel like a pro and have fun. Inside the box | 1 SHRED. Totality helmet | 1 SHRED. soft helmet bag | SHRED. sticker kit

Lightweight and durable ski and snowboard helmet in white with slim profile and adjustable ear pads. The patented Sphere Fit system assures a perfect fit. The COMPACT helmet line is focusing on the essentials of a winter sports helmet: great look, perfect fit, and – most importantly – supreme protection. The COMPACT PRO W is a super light helmet with a slim profile in a timeless design, fitting perfectly to any head shape thanks to our patented Sphere Fit system. A comfortable helmet climate is guaranteed by the vent channel system with seven ventilation outlets. - CONSTRUCTION: Hardshell Technology - SIZES: XS/S (52-55 cm), M/L (56-59 cm) Technologies: HARDSHELL TECHNOLOGY This helmet technology is outstanding in longevity and impact protection. For this reason we use it in our race and rental helmets. 360° MICROSHELL The 360° Microshell is a polycarbonate layer, which three-dimensionally wraps around the lower helmet lip, that prevents scratches and dents in the helmet’s foam. THERMAL VENTILATION Thermal Ventilation is our automatic ventilation system which leads warm air away from the head to the outside without allowing any cold air to the inside. MICROFUR Microfur is both warming and comfortable on the skin. As a helmet lining it creates the perfect fit and feel for all-day shredding. Beanie LinerBeanie Liner BEANIE LINER The soft Microfleece material of the Beanie Liner adapts perfectly to the head and thus avoids any bruises and the unpleasant entering of cold air. Molded-in mesh zones let heat and moisture escape to the outside and, together with the ventilation system, ensure a pleasant head climate. SPHERE FIT BOA® The patented Sphere Fit system wraps around the head like a beanie. When adjusting the BOA® dial, it is adjusted in all three dimensions, creating a snug and comfortable fit without applying any pressure. BOA® The BOA® Fit System allows you to adapt the helmet perfectly to your head, creating a snug and comfortable fit without any pressure. NECKGATOR The Neckgator provides comfort and warmth to the helmet wearer. It adds comfort, fit and excludes the elements. REMOVABLE EARPADS The washable earpads of this model can be taken out to suit the variable weather conditions and for cleaning. EN 1077 is the European standard for ski & snowboard helmets, taking into account the results of collision tests to ascertain dampening and puncture resistant qualities of the outer shell. Class B of this certificate certifies helmets with soft ear protectors.

A supple and warm glove made entirely of impregnated Cowhide (White made of sheepskin) with warming Primaloft insulation. Perfect for those who want a luxurious all-round glove for cold winter days. Outer Material: Impregnated cowhide - White: Impregnated hairsheep leather Insert: No insert Insulation: Primaloft Gold - A soft, down-like insulation with breathable and warming properties. - 100% Polyester. Lining: Brushed polyester - Durable lining with a soft feeling. The brushed surface binds more air which provides a better insulation. 100% polyester. Details - Neoprene cuff - Pull tab - Attachment for handcuffs - Leather pull strap with Velcro

Warm and durable mitten in short, under-cuff, style made from proofed Army Goat Leather. Removable polyester liner with G-loft insulation, making the liner easy to take out to dry or wash. Backhand in durable, polyester melange stretch fabric and neoprene cuff around the wrist. External seams for improved comfort. Outer Material: Army Goat Leather - Durable and proofed goat leather. Outer Material: HESTRA 3-layer Dobby Polyester Melange - Windproof, water-resistant and breathable. - 97% polyester, 3% elastane. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester - Removable lining Details - Handcuffs - Carabiner - Neoprene cuff - Elastic pull strap with Velcro closure

The female version of our popular Army Leather Patrol. Warm and durable glove ideal for resort and backcountry skiing. Army Goat Leather in palm and HESTRA Dobby Polyester Melange fabric on backhand. Removable polyester lining with G-loft insulation, making the liner easy to take out to dry or wash. Neoprene cuff around the wrist with Velcro closure and handcuffs. Outer Material: Army Goat Leather - Durable and proofed goat leather. Outer Material: HESTRA 3-layer Dobby Polyester Melange - Windproof, water-resistant, and breathable. - 97% polyester, 3% elastane. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick-drying, ventilated, and very compressive. Lining: Bemberg - 100% Polyester - Removable lining Details - Pull tab - Handcuffs - Elastic pull strap with Velcro closure - Carabiner - Neoprene cuff

The 16:10 + has the largest field of view of any Marker goggle, with a semi-frameless design that looks as good as it performs. With supersized spherical DUAL BIONOMIC lenses with NMT coating, the skier has a huge field of view. Its SUPERFIT frame with V-SPLIT NOSE adapts automatically to your face shape, so the goggles fit comfortably and securely every time. Marker's Clarity Mirror low light lens is included as a spare. Certification: - CE-EN-174-2001-optical-Class-1 PLUS SERIES NEOPRENE BOX - All PLUS goggles come in a lightweight neoprene box with a zipper to make transport and storage easier. The soft lining protects the goggles, while the vent holes allow for quick moisture evaporation. SECOND LENS - Including one Clarity mirror lens for low-light conditions. NMT OPTICS (3RD EYELID) - MARKER has developed the revolutionary NMT OPTICS coating for all lenses (except 4:3). It works similarly to the extra membrane that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease or dust from sticking, and moisture wicks away immediately. Fingerprints, dust, and sweat have no surface to cling to and thus are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. DUAL BIONOMIC SPHERICAL LENSE - MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented toward the curvature of the human eye to ensure that objects seen through the goggles look the way they really are. Unlike traditional, non-progressively tapered standard lenses, our lenses feature Bionomic Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn't strain the eye. Exterior lens (1) - Depending on the goggles model, various materials are used to produce the exterior lens: all standard lenses are produced from robust polycarbonate and enhanced with an extremely scratch-resistant coating. They offer 100% UV A/B/C protection up to UV 400 nm. The polarized lenses on the high-end models are produced from TAC (Tri-Acetate Cellulose). This makes them ever lighter, clearer, and more scratch-resistant. TAC lenses offer world-class visibility as well as 100% UV A/B/C protection up to UV 400 nm. Inner lens (2) - The inner lens is made of acetyl cellulose and is compression molded against the spherical outer lens as part of a heating process. This ensures that the shapes are congruent for 100% undistorted vision. The anti-fog and anti-reflex coatings are ‘embedded' in the lens to prevent them from rubbing off over the long term. Thermal blocker (3) - The interior lens also functions as a thermal blocker, creating an air barrier between the external and interior lenses. This thermal blocker compensates for differences in the temperatures, with the interior of the goggles constantly warm and dry – and fog-free. MARKAIR VENT SYSTEM - All goggle frames are outfitted with the progressive MarkAIR VENT SYSTEM. Design and airflow are engineered simultaneously so that there is perfect lens ventilation and the unobstructed flow of air is enabled along the helmet and its MarkAIR CHANNEL SYSTEM. This keeps the inside of the lenses dry and fog-free. The breathable foam behind the inlets and outlets reliably resist the penetration of snow and moisture. XDRY TRIPLE LAYER FACE FOAM - Extremely comfortable and extra soft! The three-layer Xdry construction helps produce an optimal fit and outstanding performance. The soft external fleece layer that touches the skin absorbs moistures and transports it away from the skin. SUPERFIT FRAME DESIGN - MARKER goggles stand out for their perfectly fitting form and top functionality. The shape of the goggles frames and the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from high-elastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer's face. ELASTROGRAN retains its full flexibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles fit like no other, as they adapt to the shape of the nose automatically, and seal without pinching or pressing. SILICONE ANTI-SLIP COATED GOGGLE STRAPS The high-quality, top-durability goggle straps distribute the pressure around the head for the perfect hold without irritating pressure points. Thanks to the heat applied silicone coating on the interior of the goggle straps, they sit rock-solid on any helmet for slip-free performance.

Short, durable glove made from proofed Army Goat Leather. Removable polyester liner with G-loft insulation. Backhand in durable, polyester melange stretch fabric and neoprene cuff around the wrist. External seams for improved comfort. Outer Material: Army Goat Leather - Durable and proofed goat leather. Outer Material: HESTRA 3-layer Dobby Polyester Melange - Windproof, water-resistant and breathable. - 97% polyester, 3% elastane. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester - Removable 5-finger lining Details - Outseams - Carabiner - Neoprene cuff - Elastic pull strap with Velcro closure

Our legendary Heli Ski glove adapted for Juniors. Strong polyamide weave on the back and Army Leather on the palm. Removable liner. Outer Material: HESTRA Triton polyamide fabric, Army Goat Leather - Windproof, water-resistant and breathable. - 100% polyamide. - Durable and proofed goat leather. Insulation: G-Loft - G-Loft is a very thin polyester fiber with exceptionally high insulating capacity, even in wet conditions. G-loft is quick drying, ventilated and very compressive. Lining: Bemberg - 100% Polyester Details - Handcuffs - Eagle grip - Snow lock - Pull strap with Velcro closure

The women's model of our legendary Heli Ski glove is made of soft leather with a slimmer profile and fit for a women's hands. A great choice for those who often ski powder and need an extra-warm glove. Outer Material: HESTRA Triton polyamide fabric - Windproof, water-resistant and breathable. - 100% polyamide. Army Goat Leather - Durable and proofed goat leather. Insulation: Fiberfill - 100% Polyester Lining: Removable lining Bemberg - 100% Polyester Details - Handcuffs - Snow lock - Carabiner - Eagle grip - Pull strap with Velcro closure