Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Alpine Ski Bindings

Marker 4.5
$89.99
Marker's new 4.5 Junior bindings offer high-level features like the 4-linkage Jr toe and Compact Jr 2 heel to the very youngest of skiers, allowing them to easily step in and out of the binding on their own. Apart from that the binding provides great riding safety and always enough pressure on the edge. AFD STAINLESS STEEL - All MARKER bindings are equipped with a movable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings or on ski tours. COMPACT HEEL - A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. BIOTECH - During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognizes this unfavorable force combination and reliably reduces the release force.
Marker Duke PT 12
$599.95
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties from DIN 4-12. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another advantage, the Hollow Linkage heelpiece gives the skier the security and power transmission as our Squire freeride binding on the way down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. HOLLOW LINKAGE HEEL - The Hollow Linkage Heel was designed to optimize retention for all common types of alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The very robust construction is best suited for the most strenuous requirements.
Marker Duke PT 16
$699.95
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties up to DIN 16. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another huge advantage, the Inter Pivot 3 heel piece is the same as that of the new Jester, giving you the security and power transmission of our top of the line Freeskiing bindings while skiing down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. ANTI ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. MAGNESIUM PARTS - Magnesium sole holders in the toe combined with a Magnesium heel housing provide the solid construction for the hardest charging freeride athletes. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. AFD GLIDING PLATE - MARKER bindings are equipped with a moveable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.
Marker Griffon 13 ID
$229.99 - $295.00
Skiing’s most popular binding for many years, the Griffon is totally re-designed for 2020/21. Starting up front, the new Triple Pivot Elite 3 toe piece with integrated Anti-Ice Rail gives the binding a new look and a great way to remove snow and ice from your boot soles without damaging the binding housing. The Inter Pivot 3 heel maintains its signature power transmission, while also having been re-designed to make it easier to step in, especially with many of today’s rubber boot soles. Offered in 90, 100, 110, and 120mm brake widths, all ski shapes are covered. With SOLE.ID technology, the Griffon offers 100% compatibility with any boot fitting the ISO 5355 (Alpine) and ISO 9532 (Alpine Touring) norms. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. AFD GLIDING PLATE - MARKER bindings are equipped with a moveable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings, or on ski tours. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.
Marker Jester 16 ID
$359.99
The Jester 16 ID is totally re-designed for 2020/21. Starting up front, the new Triple Pivot Elite 3 toe piece with magnesium toe wings has an integrated Anti-Ice Rail that gives the binding a new look and a great way to remove snow and ice from your boot soles without damaging the binding housing, and the horizontal spring means there is less swing weight and a shorter footprint on the ski. Its new Inter Pivot 3 heel with magnesium heel bracket maintains its signature power transmission, and it was also re-designed to make it easier to step in, especially with many of today’s rubber boot soles. With SOLE.ID technology, the Griffon offers 100% compatibility with any boot fitting the ISO 5355 (Alpine) and ISO 9532 (Alpine Touring) norms. With a 6 to 16 DIN range, top-end skiers will always find the setting they need. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. AFD GLIDING PLATE - MARKER bindings are equipped with a movable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhances optimized functionality - from racing, for children’s bindings, or on ski tours. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. MAGNESIUM PARTS - Magnesium sole holders in the toe combined with a Magnesium heel housing provide the solid construction for the hardest charging freeride athletes. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.
Marker Squire 11 ID
$189.99
The Squire 11 ID suits intermediate and lighter weight advanced skiers looking for great power transmission in a very lightweight freeride binding. The Triple Pivot Light Toe and Hollow Linkage Heel make the binding compact as well as sturdy. Its SOLE.ID technology allows the shop to adjust the binding to accommodate either AT or Alpine boot sole norms. This gives the skier the ultimate flexibility and allows them to choose a boot with easy to walk soles like GripWalk, to make it easier and (and more fun!) to walk in ski boots. SOLE.ID - One binding, two boot norms - Whatever boot you wear, all Marker SOLE.ID bindings are compatible with every kind of ski boot! Whether you prefer alpine boots or boots with touring sole, with SOLE.ID the bindings can be adjusted in seconds. The secret is the height-adjustable gliding plate; easy to handle and of course providing uncompromising performance. SOLE.ID respects ISO 5355 (alpine boots) and ISO 9523 (boots with touring soles). AFD STAINLESS STEEL - All MARKER bindings are equipped with a moveable AFD (anti-friction device) leading to a highly precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings, or on ski tours. HOLLOW LINKAGE HEEL - The heel was also redesigned from the ground up to optimize retention for all types of alpine and touring soles. The aluminum hollow axle saves on weight and maximizes the torsional stiffness. This very robust heel construction is best suited for the most strenuous requirements. TRIPLE PIVOT LIGHT TOE - The compact toe features a horizontally inserted spring. Together with the gliding plate, the gliding elements integrated into the sole holders ensure a very precise release behavior that is comparable to all other MARKER bindings. Why should touring skiers and freestylers accept any compromises? An aluminum bridge on the top provides additional support without adding any extra weight.
Marker Xcell 12.0
$229.00
The identical design to that of the X-cell 16.0 with World Cup-approved X-cell technology and the Twin Cam X (TCX) heel design, but with DIN settings tailored to young racers and with lighter weight fiberglass reinforced resin sole holders. It is the go-to binding for U12 and U14 racers needing the ultimate precision and power transmission. AFD STAINLESS STEEL - All MARKER bindings are equipped with a movable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours. INTELLIGENT BACKWARD RELEASE -Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance. X-CELL TOE -The unique Xcell technology makes it possible to filter out short jolts and keep the ski boot perpetually centered. The new Xcell binding also offers what’s likely the most radical design in racing and inspired by F1 design. TWIN CAM X HEEL - The next logical step in the improvement of our Twincam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel’s familiar effective step-in behavior has also been further improved.
Marker Xcell 16.0
$269.00
With X-cell technology and the Twin Cam X (TCX) heel design, the Race X-cell 16.0 has established itself as the go-to binding for U14 and U16 racers needing the ultimate precision and power transmission. The incredible absorption properties and large contact surface to the ski boot make it almost unbeatable on rock-hard race courses, without compromising on protection. The magnesium parts in the X-cell heel housing, X-cell toe piece and the X-cell heel feature a radical design and a Formula 1 look. A must-have for ambitious racers. X-CELL TOE - The toe pieces with magnesium sole holders (on the Xcell 16.0) stand out for the large contact area with the boot sole, top power transfer and impressive shock absorption. The unique Xcell technology makes it possible to filter out short jolts and keep the ski boot perpetually centered. The new Xcell binding also offers what’s likely the most radical design in racing and inspired by F1 design. TWIN CAM X HEEL - The next logical step in the improvement of our Twincam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel’s familiar effective step-in behavior has also been further improved. AFD STAINLESS STEEL - All MARKER bindings are equipped with a movable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours. INTELLIGENT BACKWARD RELEASE - Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance.
Page 1 of 1