Lighting

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 150 - Run Time: 18:00 – 72:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

If you’re looking for a brilliant combo set that’s powered by replaceable batteries, the Blaze 150 SL & Superflash Turbo set is a great choice. We've teamed up our brightest battery powered headlight and tail light to create the bike light set that is eye catching from 360°. Blaze 150 SL specs: - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 4.8 hrs (high – 150 lm), 11 hrs (low - 80 lm) and up to 62 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams Superflash Turbo specs: - High output surface mounted LED plus 2-5mm LEDs provide steady & Turbo flash modes - Run times: 5 hrs (steady – 20 lm) and up to 100 hrs (Turbo flash - 20 lm) - Provide 180° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and clip mount for multiple mounting options - Mount it to your rear rack with the Rack Bracket (#3108) which is sold separately - 75 grams

Planet Bike's Blaze 210 SL is the perfect urban bike light. Its rechargeable lithium polymer battery, healthy run times and 210 lumens of brilliance along with 4 modes make this a dependable bike light that keeps you visible day or night. - Cree XPG2 LED provides high and low power beam along with Courtesy & Superflash modes - FL1 Tested – Run times: 1.4 hrs (high - 210 lm), 3 hrs (low - 120 lm), 6 hrs (Courtesy 65-185 lm) and up to 21 hrs (Superflash - 210 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IPX6 standard - 1000 mAh lithium polymer battery charges in 3 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist bracket mounts, adjusts or removes without tools - Turn on with a simple press of the button, push and hold button for 3 seconds to turn off - 88 grams

- Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

The Blinky Safety Light Set features a white headlight and a red taillight, both with super bright LEDs for top-notch visibility and safety. They also have flashing and steady modes providing 220 degrees of light that can be seen from up to 1 mile. Plus, these small flashers are weatherproof, light and durable. The included batteries deliver 100 hours of run time. And, handlebar, seatpost and seatstay mounts are included so they're super easy to put on your bike.

Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket

- Front Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours for front and 11.25 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: Red = lower than 25%, Yellow = 50%-25%, Green = fully charged - No tools bracket - Sold with Avenue R-30 rear taillight - Rear light includes 5 modes - Side illumination ports

Front Compact, durable cycling light with a machined aluminum body. It features built in cooling fins and cutouts for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes—including a Daytime Flash mode. Run-time has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handlebar shapes and sizes. Rear Compact, super-lightweight USB rechargeable LED cycling taillight. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of post sizes. Five output modes offer up to 5-lumens and the custom Wide Angle Optics lens provides well over 180° of visibility. The Femto USB Rear can run for up to 15 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 500 (front) / 5 (rear) - Weight: 84g (front) / 23g (rear) - Max Runtime: 20 hours (front) / 15 hours (rear) - Recharge Time: 2:30 hours (front) / 2:30 hours (rear)

- High power 100 lux LED light, more than 50,000 hours life span - Compatible with 6-12V E-bike battery - High-quality metal housing - Double-Lens-Tech for perfect light distribution and high efficiancy - Visible from the side - Retro reflector can be mounted optionally - 105g

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Specs - Max Lumens: 200 - Weight: 47.5g - Max Runtime: 20 hours - Recharge Time: 2:15

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

Lezyne Ebike Super Bright Alert Taillight: Powerful, low-profile StVZO certified e-bike taillight with custom-programmed Alert Technology. It features 10 high-output emitters that provide a constant 12 lumens and then 24 lumens when deceleration is detected. Its co-molded design is constructed from durable Composite Matrix material, which provides an IPX7 waterproof rating. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Stainless steel mounting hardware is included. Compatibility: 6 – 12v input, 1.2w / 2.4w (Alert mode). Download the manual below for further installation and compatibility details. - Alert" brake light function - STVZO optimized lens - 130cm cable - Includes stainless steel hardware

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

FRONT LIGHT: Elevate your cycling experience with the Micro Drive 800+ Front light. Whether you ride recreationally or in challenging conditions, this is your visibility solution. With eight LEDs, this light is engineered for maximum efficiency and runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Six different output modes, including Daytime Flash, 800 lumens max output, and a 35-hour runtime on femto mode, ensure you're prepared for any circumstance. The light's waterproof USB-C charging(cable not included) and CNC-machined aluminum construction with cooling fins provide durability and convenience. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. The fresh optical design, optional GoPro mount compatibility, and Infinite Light Power Pack+ compatibility offer versatility and enhanced performance. Customize your lighting experience for your unique lifestyle with the Micro Drive 800+ Front light. REAR LIGHT: The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. - Front Light Max 800 lumens / 35-hour max runtime - Front Light Max 800 lumens / 35-hour max runtime - Waterproof USB-C charging port with charge indicator - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - Daytime Flash mode with Highly Disruptive Pattern - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity - Rear Light Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - Integrated USB stick for cable-free recharging - 400 mAh battery capacity

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Mako 200 - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - Run Times: 15:00 – 60:00 hours - 3 light settings—High, Low, and Flash - Water / Dust Resistant IP64 Rated TL 6.0 - 5 Ultra Bright LEDs - Up to 60 hours run time - Cost-effective, high-quality light - Super bright day time flash mode - 3 operating modes - Runs on AAA batteries - Water / Dust Resistant IP64 Rated